SXF-6D Aerosol Generator with Built-in Pump
Product Introduction
The SXF-6D aerosol generator housing is entirely made of stainless steel. The regulating valve and switching valve are also fully constructed from stainless steel, and the pressure gauge is an oil-filled anti-vibration type.
This product is an aerosol generator manufactured after a series of improvements. The built-in air pump uses an oil-free compressor, eliminating the need for an external air source (an external air source can also be connected if required). PAO or DOP solution is atomized through 2 or 6 Laskin Nozzles to generate a high concentration aerosol.
Typical Applications
Pharmaceutical industry applications including clean rooms, laminar flow benches, biosafety cabinets, glove boxes, HEPA vacuum cleaners, HVAC systems, HEPA filters, ULPA filters, negative pressure filtration devices, and operating rooms for filter leak testing.
Technical Parameters
| Parameter | Specification |
| Applicable Flow Range | 50–2000 cfm (84–3400 m³/h) |
| Generated Concentration | 10 ug/L at 2000 cfm (approx. 3400 m³/h) 100 ug/L at 200 cfm (approx. 340 m³/h) |
| Generated Particles | PAO, DEHS, DOP, Polydisperse |
| Generation Method | 2 or 6 Laskin Nozzles |
| Compressed Gas | Built-in oil-free air compressor |
| Power Supply | AC220–240V, 50HZ |
| Dimensions (L × H × W) | Approx. 260 × 240 × 385 mm |
| Weight | Approx. 27 kg |
| Applicable Pressure | 20 psi (0.14 MPa) Note: Use of DOP is not recommended |
Reviews
There are no reviews yet.